Gas alarm and transmitter
Author:admin | Add Time: 08-04-10
gas alarm and transmitter ( Fixed installation)
Adopt Imported electrochemical or catalytic combustion gas sensor, has the advantage of stable performance, high accuracy and good linearity, strong anti-jamming and long life. Detection probe and host combined, on-site detection, alarm, control, and continuous work. Alarm levels in the range is adjustable, sound and light alarm simultaneously. Diffusion test method, four digital tube display the measured values, control contact output, alarm linkage contact when equipment can access DCS system, choose a different sensor can measure different gases.
Diffusion-type (may be replaced by electric suction pump)
4 red LED digital display
sound and light at the same time alarm
the supply voltage of AC220V (can choose 24VDC)
alarm can be set (default setting: See table)
a simple touch-button operation
1. Detection of gas: hazardous, toxic gases in the air (see table)
2、Detection Principle: Electrochemical methods
3、detection range: (see table)
5、alarm error: ≤± 5% (F.S)
7、sensor life :≥2years
8、the use of environment: temperature -15 ℃ ~ +45 ℃; relative humidity: ≤ 95% RH
9、dimention:230×150×75mm
The main types of detected gases and alarm points list
|
|
105">
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 2000ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 200ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 2000ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 100%LEL
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 30%vol
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 2000ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 100ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 50ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 100ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 20ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 20ppm
|
|
|
|
|
105">
10pt">0 10pt">~10pt"> 25ppm
|
|
|